worm motor

Worm get gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 engine. Ideal applications where an easy to fit, high torque result is required. Great for student based assignments including robots and buggies.
The machine has been designed so that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The engine is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and additional applications where huge torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, also at very low voltages. We recommend that you utilize stall-detection sensors, or just see your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, though it is not especially intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct position worm geared motors arranged new requirements for reliability, performance and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration right now and a future proof solution. The Ever-Power gear engine offers total versatility in mounting choices includes shaft, base, face, and flange alternatives. The motor terminal box could be mounted in alternative positions rotated in 90º steps around the motor frame providing for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total option for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the utilization of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the option for applications requiring a part turn, optional dual output, or an inability for the electric motor to be back again driven. The DC right angle equipment motors are made for continuous and intermittent duty operation. Our right angle equipment reducers were created with many mounting plate choices, making them ideal for a variety of DC engine based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that require a self- locking or breaking feature since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision trim gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chair / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Products will work with you to design and manufacture a Worm Gear Electric motor which will optimize the functionality of your unique application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for durability and a higher torque output. Due to the special mechanical structure of the worm drive the engine output shaft is usually self locking and can not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their power in applications where high gear ratios are essential. Our worm geared motors are for that reason optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to meet your needs.
Worm gear devices impress with their superior power density and compact style. If required, we can also source them with the impressive nsd tupH surface treatment.
In addition to the basic EP housing, we offer an extensive type of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be pleased to assemble the individual components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear systems feature a simple, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for harsh and challenging industries like meals processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides different fixing possibilities and enable an easy assembling for the customer.
Various other drive configurationscan be designed by use of built-about add-ons (e.g. torque arm and result flanges). The housings are created in light weight construction out of aluminium die cast. Engine attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a good robust worm get gearbox powered by an MM28 motor (included), most suitable for applications where an easy to match, high torque productivity is necessary, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, ideal for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque end result is required
Perfect for student based tasks including robots and buggies
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The motor is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electric, the productivity axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option compared to the spur gear motor. How come worm gear so particular? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) is not reversible when using large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually a single start (one spiral) worm is used. This can often be a advantage when it’s desired to eliminate any possibility of the result driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g