Small Precison Worm Reduction Gearboxes
There are many of specifications you will need to consider when coming up with a worm gearbox selection.
First, what is the insight and output torque requirements? Next, verify vendor horsepower/torque charts and pick the correct worm gear reducer.
If how big is the gearbox will be an important consideration then check the reducer dimension specs, not all manufacturers make compact units. Actually, working with the right supplier will help you not just find the right gear reducer but also avoid some of the most typical mistakes in reducer selection. We offer a free guide to assist you find the right supplier to work with.
For low and fractional horsepower application we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature the hollow or solid output shaft. Both versions are compact and offer users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is indeed versatile it could work just about anyplace.
Features & Options
Double Shaft or Single Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high precision mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that are designed and built to meet your unique specifications.
Contact us for the mini gearbox the application requires, or request a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, velocity reducers, gear drives, and gearmotors. All terms can be used more or less interchangeably. Please be aware that the links for our small gear drives include details on the full selection of framework sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel package miniature gear drives are program rated for the the best possible balance of overall performance and cost. Torque can be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash performance (as little as 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an output shaft at 90° from the input, and are available in equipment ratios from 1:1 to 40:1. Light-weight but long lasting, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc minutes of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from opposing sides of the housing; output is usually a keyed bore. Standard one- and double-end shafts are available and supplied with keys and retainer bands. An array of gear ratios and input sizes are offered to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and long lasting lubrication. They provide two input shafts on reverse sides of the body, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior efficiency in an amazing array applications and are built with little footprints, making them well suited for operations where space is limited. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for speeds up to 3,000 RPM. Aluminium housings and stainless steel gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your the majority of demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged construction for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a custom miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in any configuration the application requires, with output torque levels as high as 900Nm. We can work from your gearbox styles, reverse engineer a preexisting unit, or assist you to develop an all-new style that delivers the performance you need. Ask for a quote on a custom made miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest collection of small gear reducers
Greased for life
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive important and retainer rings could be supplied to your specifications for any of our hollow bore miniature gearboxes. We provide a simple selection of single ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings in ” and metric bore sizes. In . and metric precision surface shafts are available from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox professionals. Our micro gear drive versions deliver superior performance in a little footprint, and are rugged enough for challenging work environments. Contact us to learn more about our mini gearboxes, or request a quote on a customized model that’s tailored to your needs.
Additional benefits of worm drive gearboxes include:
We would certainly love in order to help you with anything you should find out about small worm gearbox.